It works and does not overheat at 40 amps.

It works great for our camper.

It worked as expected and feels like good quality.

This is a good product.

It worked perfectly to replace the burned end of my 50-amp cord, and now I have a usable 50-amp extension when needed.

I used it to repair RV shore power extension cords, and it seems to work fine.

It is exactly as advertised at a great price.

The poor design made it a real pain to install.

It looks good, works like a charm, and is easy to wire inside for a plug. The connection is solid, and it has held up outdoors for a year.

It was exactly what we needed.

It worked great for making a mobile charger jumper with 10/4 wire.

It worked well for making my RV extension cord.

This was the right part for my camper.

The product is good and will do what it needs to do.

I used this as part of a 20-foot EV charging setup. The vehicle manufacturer warns against using an extension cord, even a heavy-duty one, so that warning should be considered.

I used this to make an extension cable for a barrel steamer. It worked great, was easy to install, and has had no issues so far.

I used this plug for a homemade welder extension cable. It works great, is simple to install, and I would recommend it.

This is a well-built replacement plug for a 14-50R cord. The terminals and wire screws are decent quality. The case screws work properly, and the cord clamp has a rubber bushing that secured my cable well. If you need a quality replacement plug, this one should not disappoint.

Most people would use this as a replacement receptacle, but I bought it to protect the blades on the 50-amp plug in my motorhome. The blades can bend slightly during travel, and placing this receptacle over them protects them. It is also easy to remove when I am ready to connect at a campground pedestal. This is an inexpensive way to protect the plug.

The end of my 50-amp extension cord was damaged, and the local options were straight-in plugs at very high prices. This receptacle matches the original cord end and feels heavier duty than the local choices. The 90-degree design and finger-grip loops are exactly what I wanted. I was glad to find the right part for less than I expected.

The large grab handle makes this receptacle much easier to separate from a 50-amp male plug. Installation is easy, and the instructions are clear. The listed cut and strip lengths use millimeters, so use a metric ruler or an online converter if needed. The quality is comparable to options I have seen in boat and RV supply stores at about half the cost.