6-Gang-Marine-Wippschalterfeld

These hold up for around a year in salty water, but then they start to break down. I'd love if they lasted longer. I'm willing to pay extra for better quality!

This rocker panel is high quality, way more water-resistant than that cheaper one that didn't last past my one rainy visit to the Keys. It's user-friendly, good-looking, and the vendor is awesome!

It's a solid product at a fair price. I replaced the far-right switch for a momentary rocker for my motor trim. Would definitely but it again for my next boat.

Easy to install, it's pretty much all pre-wired. So far, everything's working great. I've got it on my jeep for lights and other stuff, and I reckon it'd fit a bunch of different uses.

It is easy to install and operates smoothly. I've got it set up on my pontoon, and it's been holding up well against water and weather. It works great, and the mostly pre-wired setup makes for a simple install.

It is very easy to install this panel and it looks great too. I made a few minor tweaks to tailor it to my preferences. Definitely recommend this switch panel to anyone in need.

Just what we were looking for. It looks great and functions well. The price is fair too. If only the plastic part was a bit more sturdy, but no major issues. It's a good product overall. Would buy it again.

I replaced my RV's bulky, old-school switch panel with this sleek and lightweight option. It's the perfect fit and looks great. The battery display is an incredible addition, making it super easy to monitor power levels. If you're looking to upgrade your RV's electrical setup, this panel is a must-have.

Drilling a hole and setting up all the switches might be tough for some, but once it's done, it gives off a really professional vibe, and I'm a fan of that. I'm a fan of the blue light on the voltage gauge.

It's not bad, but a bit pricier than similar products out there. I run all my 12v lights through one of these units, and I really love that it shows the battery output. It's an excellent product, and I highly recommend it.

It was easy to install, and I'm really pleased with the product. If I encounter any issues, I'll update my review. The product itself seems to be well-made and worked as described, but the instructions are a little confusing.

I disliked that labeled "marine grade" for the pre-wired connectors didn't come with sealed thermo-resin heat shrink. That's easy for making adjustments, but it could lead to issues in damp conditions if you don't reseal them yourself. Fortunately, the other features are just as advertised and quite nice.

This is awesome. I've just finished setting up the sound system and navigation lights to my boat. Next up, I'm adding a bilge pump, anchor light, and some interior LEDs. I had to do a lot of rewiring and watched plenty of YouTube tutorials. But it turned out to be quite straightforward, even though I don't have any experience with wiring.

I got this switch panel to redo the wiring on my boat. So far, I'm happy with it and it's doing what it's supposed to do. We'll see how it stands up in a marine environment. The build quality is impressive for the price. The switches are all aligned, evenly spaced, and functioning perfectly.
As for the wiring, it's set up well if you're using relays. You just need to connect the three positive wires to a 12V source, ground the single grounds, and wire the switches to the relay triggers. If you're not using relays, like me, you might want to rewire it a bit. I gave each of the voltage meter, power socket, and USB jacks their own dedicated, fused 12V lead. Originally, these wires powered two switches, which is fine for relays or low-draw loads.
Since I'm not using relays for most things, I ran 12V directly to each switch from my fuse panel, separating each circuit and putting it on its own fuse. I also separated the grounds for the switches, running six individual grounds back to the ground point under the helm. That way, all the current for all the circuits isn't flowing through a tiny 16-gauge ground wire.
I routed the 12V lead for the lower LED lights to the switched power on my ignition switch, so they don't stay on all the time. I haven't had any issues with the terminals coming loose, so it seems like they've improved the spade connector design. If the connectors have a little tab in the middle, you need to use needle-nose pliers to press that tab and pull them off.

It seems really sturdy and neat. Many panels can look tacky, but I'm a fan of this one. It's about the size of a double Din stereo and it adds a touch of modern style to my car's interior.

I really love this new panel for my boat! The old one had finally given up after years of use and needed replacing badly. This new one is perfect - it's even better than I expected! What's more, it's got a USB port, which the old one lacked, so I don't need to carry a charging cube anymore. It's made a big improvement to our boating trips. Thanks a lot!

I think it's a good switch panel. The only issues I had were with the poor quality screws they provided, and I needed to carve out a bit of the voltage display to mount the panel upright. If they made it mountable in both orientations, that would be an improvement. Such a small change wouldn't require much effort to engineer.

Everything works just like it's supposed to, and the little backlights are really cool. I put it on my boat to replace the old switch setup, and now I've got better control over the lights, the live well, and some other extras I threw in. Just a heads-up: make sure to drill the screw holes in advance for the mounting.

Great value for the money. Just what I needed for our boat's makeover. It's working well and was easy to install, especially if you've got a bit of know-how. I've got this panel on the boat, replacing the old switches on the dashboard. It looks fantastic, giving my older boat a sleek, modern touch on the dash.